Skip to main content

Tour Plan Settings

1. Scene tour​

① Click the “轮巡(Tour)” button in the lower-left corner of the software to switch to the tour list and click “Add Tour” → in the “Add Scene Tour” window that opens, enter a custom scene tour name, select the scenes to tour and set the time. (Note: a scene tour requires several scenes to be created first.)

Figure 80

Figure 81

Figure 82

① To run a scene tour, double-click it in the tour list.

Figure 83

2. Signal tour​

① Right-click the signal window to tour → click “Signal Tour”.

Figure 84

② On the “Add Signal Tour” page that opens, set the switch time → in the signal list select the signals to tour and double-click them; they are added to the selected list on the right → when done, click Enable to start the signal tour on that channel. Other channels are set the same way.

Figure 85

③ When all channels to tour are configured, click “Add Scene” in the “Tour” list → in the dialog that opens, select the checkbox “” in front of “Signal Tour” → enter a custom name → click Add.

Figure 86

Figure 87

④ To run a tour mode, double-click it in the tour list; the dialog that opens lets you turn it on or off.

Figure 88