Skip to main content

Device Wiring

The interface layout of the Cloud Integrated Processor is shown below:

Figure 1

Device wiring top view (this diagram assumes wiring with decoding; which devices are actually connected depends on the site).

LED indicators: the PW power LED steady on means power is normal; the LINK network port LED blinks when data is transmitted. If it never lights, the network cable is not connected properly or the network is unreachable.

Network environment requirements: a gigabit switch is recommended and network cables must be Cat5e or better; the commissioning PC and the processor main control IP must be on the same subnet (see Chapter 2).

Figure 2