Skip to main content

Rotate Output Signals

Note: for output rotation you only need to configure the main card; other sub-cards do not need configuration.

① Open the device configuration tool, click Search to find the devices, and click the gear button after the IP with an M. (An IP followed by M is the main card.)

图100

① In the settings box that appears, select the “修改信息”(Modify Information) section, choose the rotation angle in the rotation settings, and finally click Save.

图101

③ After saving, click one-click restart to restart the device.

图102

③ When the device has restarted, log in to the software again and turn on the rotation function in the software settings; it then works normally.