Skip to main content

Adding the Gateway to a Network (Add Device)

This page selects gateways that are already online into the network as member devices.

Confirm before you start
  • The network exists (the previous page is done).
  • The gateway shows as online in the platform's 设备(Devices) list.

Steps​

Step 1 — Click 添加设备(Add device)​

Open the network management page and click 成员设备(Member devices).

Then click 添加设备(Add device).

The 添加设备(Add device)button on the 成员设备(Member devices)page

Step 2 — Select devices and confirm​

In the dialog, select the gateways to add to this network.

Click 确认(Confirm).

Step 3 — Check the member device list​

Confirm that the device names and statuses are correct.

Member device list: device names and online status

StatusMeaningAction
在线(Online)The platform and the gateway are connectedContinue with the subnet proxy
离线(Offline)The platform cannot reach the gatewayGo back to Connecting the gateway to the platform and check each item
Adding the device does not mean it can reach the peer

This step only puts the gateway on the virtual network. For the internal devices at the two sites to reach each other, you must also configure the subnet proxy. Skip the next step and the site shows "all devices online, but nothing is reachable".

What you should see when done
  • This gateway appears in the member device list.
  • The status is 在线(Online).

Next → Configuring a subnet proxy