Skip to main content

Verifying Site-to-Site Connectivity: Three-Step Acceptance

This page accepts the installation in three steps: check the status, then ping, then open the business system.

Confirm before you start
  • The gateways at both sites have joined the network.
  • Both sides have a subnet proxy configured.
  • Both access control directions are selected.

Steps​

Step 1 — Confirm everything is online​

Click 设备(Devices) on the platform, or open 成员设备(Member devices) inside the network.

Every gateway should have the status 在线(Online).

Member device list: all devices 在线(Online)

Step 2 — Ping the peer's internal IP​

On a computer at site A, press Win + R, type cmd, and press Enter.

Run:

ping 192.168.2.100

Replace 192.168.2.100 with the real internal IP at the peer site.

For example, the peer is a POS terminal.

ResultMeaningNext
Replies, latency of tens of millisecondsLayer 3 is workingDo step 3
Request timed outThe tunnel or the subnet proxy is not workingSites cannot reach each other
Destination host unreachableWrong IP, or the local gateway is wrongCheck the IP and the subnet
Test both sides

Ping from site A to site B, then ping back the other way. Acceptance passes only when both directions work.

Step 3 — Open the peer's business system​

Access the business system at the peer site.

For example the POS back office or the NVR web page.

Ping working does not mean the business works

Ping only proves layer 3. A blocked port or a service that is not running still fails to open.

Acceptance checklist​

  • Every site's gateway status is 在线(Online)
  • Ping works in both directions
  • Every site has a subnet proxy configured
  • Both access control directions are selected
  • The peer's business page opens

Acceptance record to copy​

Project name:
Acceptance date:
Site A: gateway status ____ / ping peer □ ok □ fail / business page □ opens
Site B: gateway status ____ / ping peer □ ok □ fail / business page □ opens
Subnet proxy: □ configured □ not configured
Access control: □ both directions □ one direction only
Accepted by:

Next → Network optimization