Skip to main content

Slow Network and Stuttering Surveillance: How to Diagnose

This page helps you tell apart insufficient bandwidth, a roundabout link, and a configuration problem.

Diagnose first, then change the configuration.

Ask three questions first​

QuestionWhat it points to
Is one stream stuttering, or several at onceSeveral at once usually means insufficient uplink bandwidth
Does it stutter in the daytime, or all dayOnly at peak hours means line congestion
Is only the internal network slow, or is the internet slow tooOnly the internal network points at the site-to-site link

Common causes and fixes​

CauseWhat you see on siteFix
The store's broadband uplink is insufficientOne stream is fine, several at once stutterView fewer streams at once, or view off-peak
The surveillance bitrate is too highThe picture is sharp but keeps stutteringSwitch to the sub-stream on the recorder
Peak-hour congestionStutters only at business peakView off-peak, or upgrade the line
Multi-layer NATSecondary router mode, latency on the high sideSwitch to bridge mode where possible
The site-to-site link is not optimizedInternal access is slow, local internet is fineTurn on the four items in Network optimization
Do not treat "add bandwidth" as the only answer

First confirm whether the bottleneck is the uplink or the link itself. Get the direction wrong and more money does not make it faster.

Pending

How much uplink supports how many surveillance streams, and whether the link is relayed. Pending (to be filled in by the content provider).

Where to go next​

SituationGo to
It already works, just slowlyNetwork optimization
Devices are offline, or it works intermittentlyDevice missing from the platform, or sites cannot reach each other

Next → Device maintenance